Sustainable aircraft circular design and additive manufacturing, towards a climate neutral aviation
Research and Innovation Actions on sustainable aircraft circular design and additive manufacturing for climate-neutral aviation.
This call supports projects developing advanced additive manufacturing and circular design for aircraft components. It aims to improve energy efficiency, material use, and repair technologies. The focus is on real industrial use cases to enhance sustainability and competitiveness in EU aviation.
Likely relevant for
- Aerospace manufacturers
- Additive manufacturing technology developers
- Materials science researchers
- Circular economy innovators
- Aircraft maintenance and repair providers
Project signals
What it funds
- Additive manufacturing of metal, polymer, and composite aircraft components
- Circular design and manufacturing processes for high-value aircraft parts
- Joining technologies and improved maintenance and repair methods
- Real-time condition monitoring and inspection for safety-critical systems
Expected outcomes
- Advanced additive manufacturing processes with improved performance and certification
- Sustainable circular design enabling material recovery and extended aircraft lifetime
- Energy efficiency and critical raw material savings in aviation components
- Smart repair technologies reducing overhaul needs and environmental impact
Who can apply / participate
- Research organisations
- Industry partners
- SMEs
- Higher education institutions
- Public bodies
- Consortium composition must comply with Horizon Europe rules
- Collaboration encouraged between research and industry
- Eligible entities from EU Member States and Associated Countries
- Legal entities established in China are not eligible
- Participants must comply with Horizon Europe eligibility criteria
- Use of Copernicus and Galileo/EGNOS data if satellite-based services are involved
- Specific consortium size and composition requirements
Must check before shortlisting
- Eligibility of specific countries and entities
- Compliance with lump sum funding model
- Alignment with EU aviation safety and environmental policies
Money
Total budget of approximately €5 million for 2 expected grants in 2027. Funding rate and lump sum details apply.
- Total budget for 2027 — 5000000EURFor 2 expected grants, each with a maximum contribution of €2.5 million
Application notes
- Single-stage submission model. Proposals must follow page limits and layout as per Horizon Europe guidelines.
- Proposal page limits and layout as described in Annex A and E of Horizon Europe Work Programme General Annexes
- Eligibility conditions as per Annex B
- Financial and operational capacity requirements as per Annex C
- Evaluation criteria and process as per Annex D and F
- Lump sum funding decision applies
- Prepare proposal according to Horizon Europe templates and guidelines
- Submit proposal via the Funding & Tenders Portal by deadline
- Ensure compliance with eligibility and admissibility criteria
- Use provided application and evaluation forms
- Legal entities established in China are not eligible
- Use of satellite-based data services requires Copernicus and/or Galileo/EGNOS
- Granting authority may object to transfer of ownership or exclusive licensing up to 4 years after project end
Derived from official EU Funding portal source · updated 22 Jun 2026, 15:36 UTC. Use this as a shortlisting aid; the official call text remains authoritative.
Related calls
These funding calls are closely related and may be worth considering as part of the same funding landscape.
Official source text
Fine print from the EU source record. Expand when you need the original wording.
Topic description
Expected Outcome: Project results are expected to contribute to both of the following expected outcomes: Additive manufacturing including high performance polymers, composites and metals, offering significantly improved performance compared to state-of-the-art. Entire process including design / manufacturing / characterization and testing / certification. Sustainable aircraft circular design and manufacturing processes of individual high-value components towards further developing the innovation pipeline from system demonstration to deployment stage in the EU and Associated Countries. Scope: This topic focuses on: Additive design and manufacturing of aircraft and engine structural components have already transformed the industry and are expected to be the key to the EU competitiveness. Geopolitical aspects for raw materials reinforce the importance of additive manufacturing, while the European RTOs and industry recognised that there is a substantial untapped potential towards even higher energy efficiency, savings in critical raw materials and higher quality parts. The main objective of this topic is to resolve existing challenges in the AD/AM of metal, high performance/value polymer and composite parts, related to residual stresses, non-equilibrium phase transformations, joining, defects and reproducibility among others. Building on previous research efforts (i.e. H2020-SUSTAINair) and EREA’s Future Sky initiatives on circular aviation, proposals should focus to real, challenging and competitive industrial use cases for circular design of individual components, joining technologies, improved maintenance and repair technologies to extend aircraft lifetime and improved recovery of high-quality recycling materials. Especially as regards engines and safety critical systems, real-time condition monitoring and inspection methods have the potential to improve repairability by determining an optimized degradation status, allowing smart repairs on-wing and on-site that reduce or postpone the need for material- and energy-intense overhauls or replacements.
Destination
This Destination addresses activities that improve the climate and environmental footprint, as well as competitiveness, of different transport modes. The areas of rail and air traffic management will be addressed through dedicated Institutional European Partnerships and are therefore not included in this document. This Destination contributes directly to the Strategic Plan’s Key Strategic Orientations ‘ Green transition ’, ‘ Digital transition ’ and ‘ A more resilient, competitive, inclusive and democratic Europe ’. In line with the Strategic Plan, the overall expected impact of this Destination is to contribute to the ‘Achieving sustainable and competitive transport modes’ . The main impacts to be generated by topics under this Destination are: Zero-emission road transport Accelerated uptake of a zero-tailpipe emission ecosystem, with interoperable technological solutions developed at system level (vehicles, infrastructure, user and energy grid) that support the global competitiveness of the EU transport and mobility system. Zero-tailpipe emission mobility solutions developed that are affordable, efficient, user-friendly, inclusive, safe and circular with concepts and technologies that are easy to deploy, considering needs, behaviours and socio-economic conditions of all end-users. Clean mobility solutions for a climate neutral and environmentally friendly and zero pollution mobility with a higher level of circularity; Increased responsiveness of zero tailpipe emission vehicles and systems to diverse societal interests and concerns. Aviation Enable breakthrough technologies and innovations that will contribute to the design (addressing also eco-design and circularity principles), manufacturing, maintenance and operations of new generation aircrafts, also powered by renewable energy and sustainable aviation fuels, for a competitive and clean EU aviation ecosystem (including airports). Derisk and accelerate the introduction of new digital technologies (with emphasis on AI) at all levels in the industrial aviation ecosystem, while addressing all safety-related issues in collaboration with the European Union Aviation Safety Agency (EASA). Waterborne transport Higher autonomy range in electric and hybrid vessels. Uptake of renewable and low carbon fuels and improved knowledge on the suitability of innovative renewable and low carbon fuels and other energy carriers for waterborne transport. Support the objectives of the European Port Strategy and Waterborne Industrial Strategy, contributing the role of ports as energy hubs, improving efficiency and safety through digitalization, improving the resilience and security of the transport network, as well as increasing the competitiveness of the industrial and technology EU capabilities. Significant reduction of emissions from large vessels due to the merging of energy efficiency and renewable and low carbon fuels. Sustainability of waterborne transport by design, considering air and water pollution, circularity and life-cycle assessments in shipbuilding. Improved safety of seafarers, port workers and the environment. Transport-related environment and health The better monitoring of the environmental performance and enforcement of emissions regulation and biodiversity protection in order to reduce the overall environmental impact of transport (e.g.: as regards biodiversity, noise, pollution and waste) on human health and ecosystems. Legal entities established in China are not eligible to participate in both Research and Innovation Actions (RIAs) and Innovation Actions (IAs) falling under this destination. For additional information please see “Restrictions on the participation of legal entities established in China” found in General Annex B of the General Annexes.
Conditions and documents
General conditions
1. Admissibility Conditions: Proposal page limit and layout
2. Eligible Countries
described in Annex B of the Work Programme General Annexes.
A number of non-EU/non-Associated Countries that are not automatically eligible for funding have made specific provisions for making funding available for their participants in Horizon Europe projects. See the information in the Horizon Europe Programme Guide.
3. Other Eligible Conditions
If projects use satellite-based earth observation, positioning, navigation and/or related timing data and services, beneficiaries must make use of Copernicus and/or Galileo/EGNOS (other data and services may additionally be used).
described in Annex B of the Work Programme General Annexes.
4. Financial and operational capacity and exclusion
described in Annex C of the Work Programme General Annexes.
5a. Evaluation and award: Award criteria, scoring and thresholds
are described in Annex D of the Work Programme General Annexes.
5b. Evaluation and award: Submission and evaluation processes
are described in Annex F of the Work Programme General Annexes and the Online Manual.
5c. Evaluation and award: Indicative timeline for evaluation and grant agreement
described in Annex F of the Work Programme General Annexes.
6. Legal and financial set-up of the grants
The granting authority may, up to 4 years after the end of the action, object to a transfer of ownership or to the exclusive licensing of results, as set out in the specific provision of Annex 5.
Eligible costs will take the form of a lump sum as defined in the Decision of 7 July 2021 authorising the use of lump sum contributions under the Horizon Europe Programme – the Framework Programme for Research and Innovation (2021-2027) – and in actions under the Research and Training Programme of the European Atomic Energy Community (2021-2025) [[This decision is available on the Funding and Tenders Portal, in the reference documents section for Horizon Europe, under ‘Simplified costs decisions’ or through this link: https://ec.europa.eu/info/funding-tenders/opportunities/docs/2021-2027/horizon/guidance/ls-decision_he_en.pdf]].
described in Annex G of the Work Programme General Annexes.
Specific conditions
Not applicable.
Application and evaluation forms and model grant agreement (MGA):
Application form templates — the application form specific to this call is available in the Submission System
Standard application form (HE RIA, IA)
Evaluation form templates — will be used with the necessary adaptations
Standard evaluation form (HE RIA, IA)
Guidance
Model Grant Agreements (MGA)
Call-specific instructions
Additional documents:
HE Main Work Programme 2026-2027 – 1. General Introduction
HE Main Work Programme 2026-2027 – 8. Climate, Energy and Mobility
HE Main Work Programme 2026-2027 – 15. General Annexes
HE Framework Programme 2021/695
HE Specific Programme Decision 2021/764
EU Financial Regulation 2024/2509
Decision authorising the use of lump sum contributions under the Horizon Europe Programme
Rules for Legal Entity Validation, LEAR Appointment and Financial Capacity Assessment
EU Grants AGA — Annotated Model Grant Agreement
Funding & Tenders Portal Online Manual
Support information
Online Manual is your guide on the procedures from proposal submission to managing your grant. Horizon Europe Programme Guide contains the detailed guidance to the structure, budget and political priorities of Horizon Europe. Funding & Tenders Portal FAQ – find the answers to most frequently asked questions on submission of proposals, evaluation and grant management. Research Enquiry Service – ask questions about any aspect of European research in general and the EU Research Framework Programmes in particular. National Contact Points (NCPs) – get guidance, practical information and assistance on participation in Horizon Europe. There are also NCPs in many non-EU and non-associated countries (‘third-countries’). Enterprise Europe Network – contact your EEN national contact for advice to businesses with special focus on SMEs. The support includes guidance on the EU research funding. IT Helpdesk – contact the Funding & Tenders Portal IT helpdesk for questions such as forgotten passwords, access rights and roles, technical aspects of submission of proposals, etc. European IPR Helpdesk assists you on intellectual property issues. CEN-CENELEC Research Helpdesk and ETSI Research Helpdesk – the European Standards Organisations advise you how to tackle standardisation in your project proposal. The European Charter for Researchers and the Code of Conduct for their recruitment – consult the general principles and requirements specifying the roles, responsibilities and entitlements of researchers, employers and funders of researchers. Partner Search help you find a partner organisation for your proposal.
Raw budget overview
{
"budgetYearsColumns": [
"2027"
],
"budgetTopicActionMap": {
"112963": [
{
"action": "HORIZON-CL5-2027-03-D5-17 - HORIZON-RIA HORIZON Research and Innovation Actions",
"expectedGrants": 2,
"minContribution": 7000000,
"maxContribution": 7000000,
"budgetYearMap": {
"2027": "14000000"
},
"plannedOpeningDate": "2026-12-15",
"deadlineModel": "single-stage",
"deadlineDates": [
"2027-04-14"
]
}
],
"112964": [
{
"action": "HORIZON-CL5-2027-03-D5-05 - HORIZON-IA HORIZON Innovation Actions",
"expectedGrants": 2,
"minContribution": 8000000,
"maxContribution": 8000000,
"budgetYearMap": {
"2027": "16000000"
},
"plannedOpeningDate": "2026-12-15",
"deadlineModel": "single-stage",
"deadlineDates": [
"2027-04-14"
]
}
],
"112965": [
{
"action": "HORIZON-CL5-2027-03-D5-06 - HORIZON-IA HORIZON Innovation Actions",
"expectedGrants": 1,
"minContribution": 8000000,
"maxContribution": 8000000,
"budgetYearMap": {
"2027": "8000000"
},
"plannedOpeningDate": "2026-12-15",
"deadlineModel": "single-stage",
"deadlineDates": [
"2027-04-14"
]
}
],
"112966": [
{
"action": "HORIZON-CL5-2027-03-D5-03 - HORIZON-IA HORIZON Innovation Actions",
"expectedGrants": 4,
"minContribution": 5000000,
"maxContribution": 7000000,
"budgetYearMap": {
"2027": "24000000"
},
"plannedOpeningDate": "2026-12-15",
"deadlineModel": "single-stage",
"deadlineDates": [
"2027-04-14"
]
}
],
"112967": [
{
"action": "HORIZON-CL5-2027-03-D5-04 - HORIZON-IA HORIZON Innovation Actions",
"expectedGrants": 1,
"minContribution": 13500000,
"maxContribution": 13500000,
"budgetYearMap": {
"2027": "13500000"
},
"plannedOpeningDate": "2026-12-15",
"deadlineModel": "single-stage",
"deadlineDates": [
"2027-04-14"
]
}
],
"112968": [
{
"action": "HORIZON-CL5-2027-03-D5-08 - HORIZON-RIA HORIZON Research and Innovation Actions",
"expectedGrants": 2,
"minContribution": 2500000,
"maxContribution": 2500000,
"budgetYearMap": {
"2027": "5000000"
},
"plannedOpeningDate": "2026-12-15",
"deadlineModel": "single-stage",
"deadlineDates": [
"2027-04-14"
]
}
],
"112969": [
{
"action": "HORIZON-CL5-2027-03-D5-15 - HORIZON-CSA HORIZON Coordination and Support Actions",
"expectedGrants": 1,
"minContribution": 2000000,
"maxContribution": 2000000,
"budgetYearMap": {
"2027": "2000000"
},
"plannedOpeningDate": "2026-12-15",
"deadlineModel": "single-stage",
"deadlineDates": [
"2027-04-14"
]
}
],
"112970": [
{
"action": "HORIZON-CL5-2027-03-D5-20 - HORIZON-RIA HORIZON Research and Innovation Actions",
"expectedGrants": 2,
"minContribution": 3500000,
"maxContribution": 3500000,
"budgetYearMap": {
"2027": "7000000"
},
"plannedOpeningDate": "2026-12-15",
"deadlineModel": "single-stage",
"deadlineDates": [
"2027-04-14"
]
}
],
"112971": [
{
"action": "HORIZON-CL5-2027-03-D5-18 - HORIZON-IA HORIZON Innovation Actions",
"expectedGrants": 2,
"minContribution": 10000000,
"maxContribution": 10000000,
"budgetYearMap": {
"2027": "20000000"
},
"plannedOpeningDate": "2026-12-15",
"deadlineModel": "single-stage",
"deadlineDates": [
"2027-04-14"
]
}
],
"112972": [
{
"action": "HORIZON-CL5-2027-03-D5-16 - HORIZON-IA HORIZON Innovation Actions",
"expectedGrants": 2,
"minContribution": 7500000,
"maxContribution": 7500000,
"budgetYearMap": {
"2027": "15000000"
},
"plannedOpeningDate": "2026-12-15",
"deadlineModel": "single-stage",
"deadlineDates": [
"2027-04-14"
]
}
],
"112973": [
{
"action": "HORIZON-CL5-2027-03-D5-14 - HORIZON-IA HORIZON Innovation Actions",
"expectedGrants": 1,
"minContribution": 6500000,
"maxContribution": 6500000,
"budgetYearMap": {
"2027": "6500000"
},
"plannedOpeningDate": "2026-12-15",
"deadlineModel": "single-stage",
"deadlineDates": [
"2027-04-14"
]
}
]
}
}